Data & Equipment
Share this page

Data & Equipment.

BMW K 1600 GT.

The BMW K 1600 GT awakens the longing for adventure within you. Whether you’re on a short or long route - you are always comfortably on the move. The 6-cylinder in-line engine gives your the power you're looking for to accelerate. Its running smoothness, which has already become legendary, makes even the longest of journeys into relaxing enjoyment. The extensive standard equipment ensure the highest levels of comfort and safety. Find out about all the technical data and standard equipment here.

Technical data

Engine
Type

Liquid cooled, 4-stroke in-line 6-cylinder engine, four valves per cylinder, double overhead camshafts, dry sump lubrication

Bore x stroke
72 mm x 67.5 mm
Capacity

1,649 cc

Rated output

160 hp (118 kW) at 7,750 rpm

Max. torque

129 lb-ft (175 Nm) at 5,250 rpm

Compression ratio

12.2:1

Mixture control / engine management

Electronic fuel injection with ride-by-wire throttle system

Emission control

Closed-loop 3-way catalytic converter, emission standard EU-4

Performance / fuel consumption
Maximum speed

Over 125 mph

Fuel consumption

41 mpg (WMTC)

Fuel type

Premium Unleaded

Electrical system
Alternator

Three-phase 700 W alternator

Battery

12 V / 19 Ah, maintenance free

Power transmission
Clutch

Multi-plate wet clutch, hydraulically operated

Gearbox

Constant-mesh 6-speed gearbox with helical cut gears

Drive

Shaft drive 2.75:1

Chassis / brakes
Frame

Aluminum bridge-type frame with load-bearing engine

Front wheel location / suspension

BMW Duolever; central spring strut

Rear wheel location / suspension

BMW Paralever

Suspension travel front / rear

4.5” / 5.3” (115 mm /135 mm)

Wheelbase

63.7” (1,618 mm)

Castor

4.2” (106.4 mm)

Steering head angle
62.2°
Wheels

Cast aluminum wheels

Rim, front

3.50 x 17"

Rim, rear

6.00 x 17"

Tire, front

120/70 ZR 17

Tire, rear

190/55 ZR 17

Brake, front

Dual floating disc brakes, 4-piston fixed calipers, diameter 320 mm

Brake, rear

Single disc brake, diameter 320 mm, dual-piston floating caliper

ABS

BMW Motorrad Integral ABS (part-integral)

Dimensions / weights
Length

91.5” (2,324 mm)

Width (incl. mirrors)

39.4” (1,000 mm)

Height (excl. mirrors)

56.7” (1,440 mm)

Seat height, unladen weight

Standard Seat: 31.9"/32.7", High Seat (one-piece): 31.9", Low Seat: 30.7"/31.5", Seat (one-piece): 30.7", Low Seat (one-piece): 29.5"

Inner leg curve, unladen weight

Standard Seat: 72"/73.6", High Seat (one-piece): 72", Low Seat: 69.9"/71.3", Seat (one-piece): 69.7", Low Seat (one-piece): 67.7"

Unladen weight, road ready, fully fueled

736 lbs (334 kg)

1)
Permitted total weight

1191 lbs (540 kg)

Payload (with standard equipment)

454 lbs (206 kg)

Usable tank volume

7.0 gal (26.5 l)

Reserve

Approx. 1 gal (4.0 l)

1) As defined in EU directive 93/93/EEC, filled with all operating fluids, fuelled to at least 90% of usable tank capacity (including case)

Standard Features

  • 3 Ride Modes (Rain/Road/Dynamic)
  • ABS Pro
  • Adjustable Two-Section Seat
  • Center Stand
  • Cruise Control
  • DTC (Dynamic Traction Control)
  • Dynamic ESA
  • Heated Grips
  • Heated Seats (Rider + Passenger)
  • Hill Start Control Pro
  • LED Tail Light
  • Luggage Rack
  • Multifunction Display
  • On-Board Computer
  • Power Socket
  • Saddle Bags in Body Color
  • Stepless Power Adjustable Windshield
  • Toolkit
  • Xenon Headlight with Dynamic Leveling
+ Read more
  • Spec Sheet